Features of high frequency plastic welding machine

The high frequency plastic welding machine is a machine that uses high frequency to weld plastic products. You can understand what it does from the name of the high frequency plastic welding machine. The welding of the high frequency plastic welding machine can be used in the plastic packaging industry. PVC plastic flat bag welding It is used for crimping and sealing of blister blister packaging. It can also be used for welding and embossing of plastic doormats, floor mats, carpets and other products. The processing principle of the high-frequency plastic welding machine is that the plastic product generates heat under the high-frequency effect, and then under the pressure and the high-frequency mold effect, the welding process is performed on the position that needs to be hot-melted.

What are the characteristics of high frequency plastic welding machine:

  1. The cycle rate of the high-frequency plastic welding machine is stable, so that the effect of the high-frequency welding products can be uniform and consistent, and the welding is firm and beautiful.

2. High frequency has a little impact on other electronic products around, but the high frequency plastic welding machine is equipped with an electromagnetic wave interference avoidance device system, which reduces the interference of the machine to other equipment.

3. The high-frequency welding time and pressure can be adjusted. In this way, the corresponding temperature and pressure can be adjusted according to the characteristics of the heat-sealed plastic and plastic products, and the product can be adjusted slowly during the sample to achieve the desired effect.

4. When the current is too high, the over-current protection device of the high-frequency plastic welding machine will automatically cut the high-frequency output, which can effectively prevent the high-frequency electronic tube from burning out due to high current.

5. During high-frequency welding, it is normal that sparks sometimes occur, but the anti-sparking device system is installed, and the machine will effectively prevent the high-frequency molds from burning out due to excessive current when the current is high.